How to Remove Rust using CRC Rust Converter or CRC Evapo-Rust

How to remove rust using:

CRC Rust Converter

CRC Rust Converter Aerosol is a game-changer in the battle against rust. This innovative formula works by chemically converting rust into a stable compound, effectively halting its progression. Unlike traditional rust treatments that merely cover the surface, CRC Rust Converter penetrates deep into the rust, creating a durable barrier that prevents further corrosion.

How to use CRC Rust Converter:

1. Apply only when temperatures are between 10 °C and 32 °C.
2. Remove dirt, grease, oil, moisture and other contaminants.
3. Remove blistered or loose paint and loose or heavy rust scale with a scraper or mechanical sander.
4. Use of rubber gloves is recommended.
5. Shake well before using.
6. Spray onto surface in light, even strokes.
7. Allow 2 hours curing time. Product will continue to convert rust over time. Overcoat with CRC Prep It and CRC Coloured Zinc for best results.
8. Overspray can be cleaned up with CRC Stuff Off Adhesive and Paint Remover.
9. When finished using, turn can upside down and spray to clear product from the valve and spray head. Wipe spray head clean with cloth or paper towel

CRC Evapo-Rust Ready To Use

CRC Evapo-Rust Ready-to-Use is a potent rust remover that eliminates rust without the need for scrubbing or sanding. Unlike traditional rust removal methods that involve harsh chemicals or abrasive tools, CRC Evapo-Rust relies on a safe and environmentally friendly formula to dissolve rust effectively, leaving behind pristine metal surfaces.

How to use CRC Evapo-Rust Ready To Use:

1. Read entire label before use.
2. Pre-clean item if it is dirty or oily.
3. Rinse item thoroughly and completely immerse item in EVAPO-RUST®.
4. Continue soaking until all rust has been removed, deeply rusted items will require
   extended soak times.
5. Once rust is removed rinse item with water and dry, for larger items, water blasting give
   best results.